What are you looking for?
SF-F22IS is prepared by VDF suspension polymerization. The pellet can be applied in the injection process for Pipes, fittings, Valves and Pump assemblies.
Don’t hesitate to contact us for a pricing inquiry on our PVDF pellet.
Polyvinylidene fluoride (PVDF) is a new fluorocarbon thermoplastic with excellent mechanical performance, good impact resistance, abrasion resistance, weatherability and chemical stability. It is widely used in chemical industry, electrical and electronic industry, food industry, space industry and architectural decoration industry as it can be used to produce pump valves, pipe fittings, films, wire insulating layers, lithium battery adhesive and fluorocarbon coatings.
SF-F22IE is prepared by VDF emulsion polymerization, SF-F22IS is prepared by VDF suspension polymerization. The pellet can be applied in the injection process for Pipes, fittings, Valves and Pump assemblies.
Item | Unit | Test standard | SF-F22IS |
MFR | g/10min | ASTM D1238 | 10-30 |
Melt Viscosity@230℃，100s-1 | Pa.S | ASTM D3835 | 700-1000 |
Density | g/cm3 | ASTM D792 | 1.75-1.79 |
Melting Point | ℃ | ASTM D3418 | 166-172 |
Water Absorption | Wt% | ASTM D570 | ＜0.05 |
Tensile Strength at Yield | MPa | ASTM D638 | ＞50 |
Tensile Strength at Break | MPa | ASTM D638 | ＞35 |
Modulus | MPa | ASTM D638 | 2200-2600 |
Notched IZOD Impact Strength@23℃ | J/m | ASTM D256 | 80-1000 |
Limiting Oxygen Index(sheet 3mm thick) | % | ASTM D2683 | 44 |
This product should be processed under 370℃,to avoid producing toxic gases;
PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds;
Operators should take good care of personal protection during the use procedure and processing.
25 kg and 250 kg packages can be provided. PVDF is packed in double layer of polyethylene plastic bag and then put into a hard cardboard drum.
It must be stored in clean, cool, dry place.
